EN
For those, who operate a DTF (Direct to Film) printer on the other hand, things can go wrong sometimes. But don't worry. With a few simple tips and tricks, however, things that go wrong can typically be pretty easily fixed. Whether it’s clogs in your ink system, a lackluster print job, or annoying paper jams, you can count on us. Don’t forget that properly handling your Titanjet DTF printer can save you from such problems and keep you away from headache.
Locating and Cleening ink clogs on your DTF Printer
Ink clogs are the worst. If clogged ink is a problem with your Titanjet printer, the first thing you will want to do is to inspect the cartridge. Ensure they are in place and not empty. If the cartridges are in good order, you can also attempt a 'cleaning cycle' from the UV DTF transfer label Printer settings menu. This can work for clearing out clogs. If that doesn’t fix the position, you may have a blockage in the print heads. Occasionally, gently swiping them with a soft, damp cloth can help remove dried ink that’s responsible for the clog.
Addressing bad prints when doing DTF printing
It can be frustrating if the print quality is not good. If your prints are too blurry or the colors look off, try adjusting the settings on your printer. Check that you are using the appropriate paper type and print quality. Also make sure that the ink Consumables is not running out. Another piece of advice is to be sure the print path is free and the paper isn’t crumpled or moist. The adjustment is minute but it can be significant when it comes to enhancing print quality.
Solving connection problems with your DTF printer
At times, your Titanjet printer can cause connection problems with your computer. It may be a problem with connecting. First, verify that the cabling between your printer and the computer is secure and free of any loose connections or physical damage. If you are on Wi-Fi, ensure the signal is strong. Also try rebooting both your printer and computer. One small thing to try is turning uv dtf sticker equipment off, and then back on, which can resolve connectivity issues on occasion.
Problem solving: paper jamming errors on the DTF printers
Paper jams can bring your printing to a halt. Turn off your printer first if your printer tells you there is a jam. Then, open the printer cover and remove the jammed paper. Be careful not to tear it. After you peel off the paper, inspect the layers for any wayward shards that may have escaped. These can cause more jams. Shut the lid and turn on the power of the printer. It should be ready to go.
Unfrtunately there are still ghosting in DTF print, but why? And How?
Ghosting is when you find a washed-out version of your image elsewhere in your print. There are a few different things that can cause that. One thing that often contributes is using the incorrect paper. Ensure you are using paper that’s suitable for DTF printing. Then again, it could be too much heat on the part of the printer that’s causing the ink to pool. You can try this on your Titanjet printer by playing around with the heat settings; this may help eliminate the banding.
